With the continuous increase in the cost of energy and the continuing decrease in incentives for renewable energy, it is essential to obtain the maximum results from your photovoltaic system.

The use of the Solis storage system will allow you to maximize the yields of your photovoltaic system, reducing dependence on traditional electricity suppliers.

The system gives priority to the power supply of the loads and the storage of energy in the DYNESS lithium battery over the transfer to the network.

In this way you can use the energy previously stored even when the photovoltaic system does not produce, maximizing domestic self-consumption.

NOTE: After completing the installation of the battery system and verifying its correct functioning, you must access the official DYNESS website to register the product and activate the warranty.
To register, go to the dyness.com website, select service -> Warranty registration and fill out the form.

COMPONENTS OF THE KIT

	1	Inverter Hybrid	Inverter Hybrid Single phase 10kW Photovoltaic System with Lithium storage	Download
	2	Lithium Battery	Lithium Battery 5.12kWh Dyness DL5.0C PRO	Download
	1	Pair of connectors	Pair of Amphenol connectors for Solis inverters

Main features of the inverter:

• Supports PV input up to 160% of the inverter’s rated DC power, maximizing solar energy utilization;
• Supports PV input current up to 21 A, compatible with future higher-power PV modules;
• 200% overload for 10 seconds in off-grid mode, ensuring stable start-up of motors, water pumps, and air conditioners;
• Seamless on/off-grid switching in less than 10 ms, ensuring an uninterrupted power supply;
• Supports unbalanced three-phase output, with each phase supporting a maximum output of 50% of the inverter’s rated power;
• Supports both DC and AC coupling, facilitating PV expansion, battery charging, and load power supply in a reliable manner, even under off-grid conditions;
• Multiple generator connection methods and automatic control enable flexible local deployment; supports up to 6 units in parallel, expanding system capacity;
• Intelligent load management with priority assignment, extending backup time for critical loads;
• Customizable battery backup level for uninterrupted power supply;
• Supports PV-only off-grid operation, reducing initial costs;
• AI-based and VPP compatible: maximizes savings and unlocks additional revenue;
• 7-inch industrial-grade touchscreen, providing a larger and more intuitive interface for local operation;
• IP66 protection, for operation in harsh environments.

Main features Battery:

• Flexible expansion: up to 50 units in parallel, capacity from 5.12 kWh to 256 kWh;
• 1C discharge: simultaneous power supply to multiple loads without worrying about power outages;
• Automatic self-heating: operating temperature from -20 °C to 55 °C;
• Easy installation: supports wall-mounted, floor-mounted, stacked, and rack-mounted installations, high space utilization;
• Intelligent management: real-time system monitoring, remote control, OTA updates;
• Ultra-safe: intelligent fire suppression system, detects and extinguishes a fire within 5 seconds (optional).