Single-phase inverter for stand-alone systems SP24 4000W VM III TWIN MPPT 5000W
€495.00 Vat excl.
The 4000 VM III TWIN inverter is a pure wave and high frequency inverter/UPS, ideal for creating Off-grid photovoltaic systems completely detached from the electricity grid. Through this product you can power your utilities even in places not served by the electricity grid, for example huts and country houses.
Single-phase inverter for stand-alone systems SP24 4000W 24V VM III TWIN 24V MPPT regulator 5000W
The 4000 VM III TWIN inverter is a pure wave and high frequency inverter/UPS, ideal for creating Off-grid photovoltaic systems completely detached from the electricity grid. Through this product you can power your utilities even in places not served by the electricity grid, for example huts and country houses. These inverters can also be easily used in the residential sector as they support the AC power grid or a current generator at the input, this will allow you to integrate your photovoltaic system into your home's system without difficulty, reducing the costs of your bill.
The peculiarity of this inverter, compared to the other models, is that it can work with and without batteries
Use without batteries is particularly suitable for those who use the system during the day (offices, companies, etc.) when the energy produced is used immediately, without having to store it in the batteries for night-time use.
The inverter is equipped with WiFi which can be used to connect locally for both control and programming.
The 4000 VM III TWIN inverter has an integrated 5000W MPPT charge controller
It supports USB On-the-Go function
Reserved communication port (RS-485) for BMS
This third generation inverter has the communication port reserved for BMS and they support Pylontech up 2500 and Yilink 24V.
Features
- Off-grid mode (without grid, solar and/or generator + batteries): the inverter powers the loads by drawing energy directly from the photovoltaic system. In the event that the energy produced is not sufficient, the inverter will automatically draw the energy previously accumulated from the batteries. The batteries can also be charged via a current generator as the inverter supports it at the input;
- SBU mode (solar + batteries + grid): the inverter powers the loads by drawing energy from the photovoltaic system, if the energy is not sufficient, the inverter will also draw from the batteries. The withdrawal of energy from the network will only take place when the batteries are discharged or their voltage drops below the minimum set threshold;
- UPS mode (mains + batteries): using the inverter in UPS mode (mains priority) the batteries will be charged from the mains, in the event of a black-out the energy needed to power the loads will be taken from the batteries, ensuring continuity of cargo service. The exchange between the mains and the batteries will take place automatically.
For more details, download the following documents:
- User manual: [Download]
Technical features
Input | |
Model | 4000 VM III TWIN |
Nominal power | 4000W 24V |
Voltage | 230 VAC |
Selectable voltage range | 170-280 VAC (Personal Computer) 90-280 VAC (Home applications) |
Frequency range | 50Hz / 60Hz (autosensing) |
Output | |
AC Voltage Regulation (battery mode) | 230VAC ± 5% |
Peak power | 4000W |
Peak Efficiency | 90-93% |
Transfer Time | 10 ms (Personal Computers) / 20 ms (Home applications) |
Waveform | Pure Wave |
Self-consumption | 40W |
Battery | |
Battery Voltage | 24VDC |
Overload protection | 32VDC |
Solar charger & AC charger | |
Regulator type | MPPT |
Maximum VOC voltage | 450VDC |
Maximum PV Capacity | 5000W |
Operating voltage MPPT range | 120-450VDC |
General characteristics | |
Storage temperature | -15°C - 60°C |
Operating temperature | -10°C - 55°C |
Humidity | 5% to 95% Relative Humidity (Non-Condensing) |
Communication interface | RS232 - RS485 (BMS) |
Dimensions (L x W x H) | 115 x 300 x 435 mm |
Net weight | 9kg |
- Product Code
- IN-SP-AVM3T4K54-24
- Surge Power
- 4000VA
- Waveform
- Pure Sine Wave
- Rated Power W
- 4000