VE.Direct Communications Port

The VE.Direct port can be connected to:

• A computer (VE.Direct to USB interface cable required)
• Smartphones, tablets, MacBooks, and other Apple and Android devices (VE.Direct Bluetooth Smart dongle required)

Fully configurable:

• Low battery voltage alarm trip and reset levels
• Low battery voltage cut-off and restart levels battery
• Dynamic cut-off: load-dependent cut-off level
• Output voltage 210 - 245 V
• Frequency 50 Hz or 60 Hz
• ECO mode activation/deactivation and ECO mode detection level

Monitoring:

• Input and output voltage, load %, and alarms

Proven reliability

The full-bridge topology with toroidal transformer has proven its reliability over many years. The inverters are protected against short circuits and overheating, both due to overload and high ambient temperatures.

High starting power

Necessary for starting loads such as power converters for LED lamps, halogen lamps, or power tools.

Eco Mode

In ECO mode, the inverter switches to standby when the load drops below a preset value (minimum load: 15 W). Once in standby, the inverter switches back on for a short time (adjustable, default: every 2.5 seconds). If the load exceeds a preset level, the inverter remains on.

Remote On/Off

A remote on/off switch can be connected to a two-pole connector, or between the positive battery post and the left contact of the two-pole connector.

To transfer the load to another AC source: the automatic transfer switch

For our low-power inverters, we recommend our Filax automatic transfer switch. The Filax offers a very short switching time (less than 20 milliseconds) so computers and other electronic equipment continue to operate without interruption.

Technical Specifications

• Model: PIN242121100
• Rated Power: 1000W 24V 1200VA
• Continuous Power at 25°C: 1200VA
• Continuous Power at 25°C / 40°C: 1000 / 850W
• Peak Power: 2200W
• AC Output Voltage/Frequency (adjustable): 230VAC or 120VAC +/- 3% 50Hz or 60Hz +/- 0.1%
• Range Input voltage: 9.2 - 17 / 18.4 - 34.0 / 36.8 - 62.0V
• Low battery shutdown (adjustable): 9.3 / 18.6 / 37.2V
• Low battery restart and alarm (adjustable): 10.9 / 21.8 / 43.6V
• Full battery detection (adjustable): 14.0 / 28.0 / 56.0V
• Maximum efficiency: 91 / 91 / 92%
• Zero-load power: 7 / 8 / 10W
• Default no-load power in ECO mode (Default search range: 2.5 sec, adjustable): 1 / 1.5 / 3.0W
• ECO mode power start and stop settings: Adjustable
• Protection: a - f
• Operating temperature range: -40 to +65°C (fan-assisted cooling) Power reduction by 1.25% for each °C above 40°C
• Humidity (non-condensing): max. 95%

---

For more details, download the following documents:

• Datasheet [Download]

---

Customer service

---

0882 22 82 47

[email protected]