Victron Energy

The VE.Bus BMS protects each individual cell of a Victron lithium-iron-phosphate (LiFePO4 or LFP) battery.Each individual cell of a LiFePO4 battery must be protected against over voltage, under voltage and over temperature. Victron LiFePO4 batteries have integrated Balancing, Temperature and Voltage control (acronym: BTV) and connect to the VE.Bus BMS...

The MPPT Control lets you see the status as well as setup all BlueSolar MPPT Charge Controllers that have a VE.Direct communications port.

The Color Control GX (CCGX) provides intuitive control and monitoring for all products connected to it. The list of Victron products that can be connected is endless: Inverters, Multis, Quattros, MPPT 150/70, BMV-600 series, BMV-700 series, Skylla-i, Lynx Ion and even more.

The Digital Multi Control Panel GX is the same as the previous version, but with a new design. An extra advantage of this panel is the easy mounting: the included mounting frame allows the user to mount the panel from either front or back side. 

This box is used for the housing of Battery Alarm GX , Skylla -i Control GX and Digital Multi Control 200 / 200A GX in order to hide the connecting cables and poterllo fixed to the wall.

This panel is intended for Phoenix Inverters equipped with a UTP remote monitoring and control socket. It can also be used on a MultiPlus Inverter/Charger when an automatic transfer switch but no charger function is desired. The brightness of the LEDs is automatically reduced during night time.

The Phoenix Charger Control panel provides remote control and monitoring of the charge process with LED indication of the charger status. In addition, the remote panel also offers output current adjustment that can be used to limit the output current and thus the power drawn from the AC supply.

Victron Skylla-i Control GX panel gives you a clear view of what the Skylla Battery Charger is doing as to which charge stage it is at and what the current is doing. This Model has the 90 Degree RJ45 connector for easy connecting and installation.

Remote switch for Charger Skylla - TG

The Skylla Control allows you to alter the charge current and see the system status.

The Battery Alarm is a small and low cost alarm panel which monitors your battery bank. It features both audible and visual alarms, as well as a potential free contact with normally open and normally closed contacts. Alarm thresholds and hysteresis are programmable by DIP switches. See manual for more information.

VE. Net Panel Monitoring Device Victron EnergyThe VE.Net panel provides a user interface to all connected VE.Net devices.On it pua connect one or more devices such as VE.Net VE.Net VE.Net the control monitor but also apparecchiuature as inverters or combinations multi invert / charger or third-party devices.

VE. Net GMDSS Panel Monitoring Device Victron EnergyThe VE.Net panel provides a user interface to all connected VE.Net devices.On it pua connect one or more devices such as VE.Net VE.Net VE.Net the control monitor but also apparecchiuature as inverters or combinations multi invert / charger or third-party devices.

The Blue Power Panel provides intuitive control for all devices connected to the VE.Net network. It can be used to view and configure the full range of settings on VE.Net devices. Furthermore, its fully customizable overview screens make it the ideal monitoring tool for your power system. The BPP now features an integrated VE.Net to VE.Bus Converter (VVC).

Remote Control Panel for 24V battery system Lynx Ion.

This panel is intended both for Multis and Quattros. It allows PowerControl and PowerAssist current limit setting for two AC sources: a generator and shore side current for example. Setting range: up to 200 Amps. The brightness of the LEDs is automatically reduced during night time.

Venus GXThe Venus GX provides intuitive control and monitoring for all Victron power systems. The list of Victron products that can be connected is endless: Inverters, Multis, Quattros, MPPT solar chargers, BMV battery monitors, Lynx Ion + Shunt and more.

This panel is designed for Phoenix inverters equipped with VE.Direct socket for remote control. The brightness of the LEDs is reduced automatically at night.

The Lynx-ion BMS reduces wiring and installation time to a minimum: it combines four fused battery connections, four fused DC load connections, a safety contactor and a current shunt with a BMS in one compact enclosure.

The Lynx-ion BMS reduces wiring and installation time to a minimum: it combines four fused battery connections, four fused DC load connections, a safety contactor and a current shunt with a BMS in one compact enclosure.

Panels and system monitoring The Octo GX is the communication-centre of your installation. It connects the components together and ensures they are working in harmony. Monitoring of live data, and changing settings is performed by using your smartphone (or other device) via our free-to-use Victron Remote Management Portal, VRM.

The Color Control GX (CCGX) provides intuitive control and monitoring for all products connected to it. The list of Victron products that can be connected is endless: Inverters, Multis, Quattros, MPPT 150/70, BMV-600 series, BMV-700 series, Skylla-i, Lynx Ion and even more.