Single-phase hybrid inverter HYD 6kW...

Single-phase hybrid inverter HYD 6kW ZSS Azzurro Zucchetti for lithium storage

ZZT-HYD6.0K
€2,113.16
VAT included 10 %

€1,921.05 Vat excl.

The hybrid inverter is used in photovoltaic systems with battery storage. The system can be combined with Azzurro, WeCo and Pylontech batteries supplied in kit form by ZCS Azzurro. The energy produced by the photovoltaic system will be optimised for maximum self-consumption. 

100% secure payments
 

AZZURRO Inverter For Hybrid Storage HYD 6kW ZSS


The hybrid inverter is used in photovoltaic systems with battery storage. The system can be combined with Azzurro, WeCo and Pylontech batteries supplied in kit form by ZCS Azzurro. The energy produced by the photovoltaic system will be optimised for maximum self-consumption. The 1PH inverter can operate in automatic mode and in time-of-use charge, charge/discharge mode. In automatic mode, when the energy produced by the PV field is greater than that required by the utilities, the 1PH inverter charges the battery using the photovoltaic energy in excess, and when the photovoltaic energy is lower than that required, the inverter uses the energy stored in the battery to supply current to the local load. In the event of a power failure (or by switching on the inverter in Off-Grid mode), the 1PH HYD3000-HYD6000- ZSS inverter can operate in Emergency Power Supply (EPS) mode. The 1PH inverter will use both the energy created by the photovoltaic panels and the energy stored in the battery to supply energy to the critical load.


Key Benefits

  • Automatic management of the energy flows from the photovoltaic system, battery and grid
  • On-board Energy Metre
  • Possibility of operation in zero grid feed-in mode
  • Unit compatible with both lithium batteries and other 48V technologies
  • Stand-Alone support mode guarantees continuity of operation and “island” operation, both from the photovoltaic source and battery in the event of power failure.


For more details, download the following documents:


TECHNICAL FEATURES

DC input data (photovoltaic)
Typical DC power * 7200W
Maximum DC power for each MPPT 3500W (300V-520V)
Independent MPPTs/Strings each MPPT 2/1
Maximum DC voltage 600V
Start-up voltage 120V
Nominal DC voltage 360V
MPPT range in DC 90V-580V
Full power range in DC 300V-520V
Maximum input current for each MPPT 12A/12A
Maximum absolute DC input current each MPPT 15A/15A
Battery input data
Type of batteries Lithium Ion (supplied by Zucchetti)
Nominal voltage 48V
Voltage range 42V-58V
Maximum charge/discharge power 3000W
Maximum charge current 65A (set)
Maximum discharge current 65A (set)
Depth of Discharge (DoD) 0%-90% (set)
AC output
Nominal AC Power 6000W
Maximum AC Power 6000VA
Maximum AC current each phase 27.3A
Type of connection/Nominal AC grid voltage Single-phase L/N/PE 220, 230, 240V
EPS Output (Emergency Power Supply)
Maximum Power in EPS 3000VA
Voltage and frequency in EPS Single Phase 230V 50Hz/60Hz
Maximum current in EPS 13A
Efficiency
Maximum efficiency 98.0%
Efficiency MPPT >99.9%
Maximum charge/discharge efficiency 94.6%
Standby consumption < 5W
Standard
EMC EN 61000-3-2/3/11/12, EN 61000-6-2/3
Safety standard IEC 62116, IEC 61727, IEC 61683, IEC 60068-1/2/14/30, IEC 62109-1/2
Communication
Interfaces Wi-Fi/4G/Ethernet (optionals), RS485 (proprietary protocol), SD card, CAN 2.0 (Battery data connection)
Additional I/O AC Current sensor connection input or dedicated meter
SD card data storage 25 years
General information
Environmental protection degree IP65
Acustic noise < 25dB @ 1mt
Weight 20.5Kg
Cooling system Natural convection 
Dimensions (H*W*L) 566mm x 394mm x 173m
Display LCD
Warranty 10 years


Customer service


0882 22 82 47
 
MPPT number
2
Typology
Single-phase
Inverter power
6.0kW
Manufacturer Inverter
ZCS Azzurro
No reviews

Customers who bought this product also bought:

Product added to wishlist
Product added to compare.