Kit Solenergy 100W with Solar Charge controller 350W 12V 25A SunControl and Fairlead
The new SOLENERGY photovoltaic modules, with integrated and customized nds fixing brackets, are built according to the most modern production technologies, to guarantee the highest levels of performance. Each module is made with monocrystalline silicon cells protected by a Tedlar sheet and highly transparent tempered and textured glass, with low iron content and with an anti-reflective cover that increases its performance up to 17.25%, all vacuum-packed between two sheets of EVA (Ethylene Vinyl Acetate).
SOLENERGY modules comply with the strictest quality and safety standards IEC61215, IEC61730 and ISO9001 / ISO14000 certification. In fact, they resist the most severe environmental and pollution conditions. They are equipped with by-pass diodes to protect the cells from overvoltages and minimize the power loss due to any shading phenomena.
Solar Charge controller
The automatic solar regulator with MPPT technology to push the efficiency of photovoltaic modules to the maximum: more energy, less space.
SUNCONTROL2, SC320M manages up to 320W input, with a maximum charge of 20A.
SUNCONTROL2 is compatible with the following battery technologies: Free Acid, GEL, AGM and LiFePO4 and both the leisure batteries and the starter battery can be recharged.
The state of charge (SoC) of both connected batteries is immediately visible on top of the device thanks to the two multicolored LEDs.
The system works with a 12V nominal voltage and it is possible to connect two photovoltaic panels, on separate inputs, with a maximum power of 160Wp.
KOMPONENTEN DES KIT
|1||Solar Panel||PSM100WP||Solar Panel Monocrystalline 100W|
|1||Charge controller||SC350M||Solar Charge controller 350W 12V 25A MPPT - SUNCONTROL 2 NDS|
|1||Fairlead||PASSATETTO||Hole cover Fairlead for Roof 2-way with PG9.|
- Product Code
- Nominal Output (Pmax) W
- Type Panel
- Cell type
- Technology (MPPT - PWM)
You might also like