You can set the output voltage between 20V and 30V by turning the potentiometer (use a flathead screwdriver nr 01 - 3.5mmx0.75mm) .The default is 24.2V. Without load the value may be slightly higher.

Imporant note: Always connect a small load when the output voltage setting. If you set it not, when a load is applied the output will be lower. Turn counter clockwise to decrease tension. Turn clockwise to increase the tension.

Use the Orion Tr converter in a cool, dry, well-ventilated.

Assembly instructions:

First of all connect the power cable "negative" to one of the Orion negative terminals. The two negative terminals are connected together. Incorrect connection of the negative pole may cause output overvoltage and then connect the remaining cables. It is mandatory to enter an external 5A fuse input and output plus side.