Product successfully added to your shopping cart
Quantity
Total
There are 0 items in your cart. There is 1 item in your cart.
Total products (tax excl.)
Total shipping (tax excl.) To be determined
Total (tax excl.)
Continue shopping Proceed to checkout
Adesivo sigillante MS-PREMIUM BCO 310ml per Vetro e metallo Agrandir l'image

Adhesive sealant MS ADHESIVE AND SEALANT WIT 310ML Glass and metal


€ 21,33 TTC


€ 17,48 HT

SIG-W-METALLO

Neuf

Universal, durable, elastic, 1-component, MS polymer-based adhesive and sealant

Ideal for elastic adhesive bonding in the construction, metal/automotive industry, mechanical engineering, shipbuilding etc.

Plus de détails

3 Produits

Attention : dernières pièces disponibles !

Code Produit SIG-W-METALLO

Adhesive sealant
MS ADHESIVE AND SEALANT WIT 310ML

Glass and metal glue

Universal, durable, elastic, 1-component, MS polymer-based adhesive and sealant

Ideal for elastic adhesive bonding in the construction, metal/automotive industry, mechanical engineering, shipbuilding etc.

Notice
Not suitable for polyethylene, polypropylene, silicones, PTFE (Teflon®) or soft plastics.
This advice is purely a set of recommendations based on our experience. We advise that you test it for yourself beforehand.

Instructions
The surfaces must be clean, dry and free from dust and grease. For best results, we recommend using primer. Apply the primer in a thin layer, according to the surface, on the cleaned, grease-free and dry adhesion surfaces. Before applying the sealant, the primer must have evaporated. Please observe the specified drying times.
Most primers contain flammable solvents and are moisture-sensitive. It is therefore advisable to close the container immediately after use. Tip: The material should be primed or varnished over the top within 2 hours, otherwise there is a risk of adhesion problems.



Very good adhesion to almost all surfaces such as plain, galvanised, primed or varnished sheet steel, aluminium, stainless steel, copper, plastic, ABS, hard PVC, concrete, wood, glass etc.
  • Moisture-curing
  • Good levelling properties
  • When freshly applied, can be painted over with almost all varnish types commonly used in the trade (please test it yourself beforehand)
  • Suitable for powder coating, reaches 200°C in a short time
  • Bonded sheeting can be spot welded
  • Permitted for use in the vicinity of foodstuffs (EC) No. 1935/2004
  • Solvent-free
  • Isocyanate- and silicone-free
  • Weatherproof

Technical features

  • Chemical basis: MS hybrid polymer
  • Colour: White
  • Density: 1,55 g/cm³
  • Smell/fragrance: Characteristic
  • Min. skin-formation time: 10 min
  • Full curing speed: 2.5 mm/d
  • Min./max. processing temperature: 5 to 40 °C
  • Min./max. temperature resistance: -40 to 90 °C/
  • Ultraviolet resistance: Yes
  • Silicone-free: Yes
  • Shore A hardness: 60
  • Shelf life from production: 12 Month
  • Contents: 310 ml
  • Product weight: 550,958 g


   Downloads

   Customer service

0039 (0)882 22 82 47
[email protected]
Path: > > > > > > Adhesive sealant MS ADHESIVE AND SEALANT WIT 310ML Glass and metal

PayPal