€ 787,38 tax incl.
The inverter SI5000 is an inverter / ups-wave pure and high frequency, suitable for the realization of photovoltaic systems Off-grid.
8 Item Items
Delivery: 1-2 days
Warning: Last items in stock!
|Selectable Voltage Range||170-280 VAC (For Personal Computers) 90-280 VAC (For Home Appliances)|
|Frequency Range||50 Hz/60 Hz (Auto Sensing)|
|AC Voltage Regulation (Batt. Mode)||230 VAC|
|Transfer Time||10 ms (For Personal Computers) 20 ms (For Home Appliances)|
|Floating Charge Voltage||54 VDC|
|Overcharge Protection||60 VDC|
|Maximum PV Array Open Circuit Voltage||105VDC|
|Standby Power Consumption||2 W|
|Maximum Solar Charge Current||50 A|
|Maximum AC Charge Current||60 A|
|Maximum Charge Current||110 A|
|Humidity||5% to 95% Relative Humidity(Non-condensing)|
|Operating Temperature||0°C - 55°C|
|Storage Temperature||-15°C - 60°C|
|Dimensions (D x W x H)||120 x 295 x 468 cm|
|Net Weight||9.8 Kg|
|Rated Power W||4000|
|Waveform||Pure Sine Wave|
|Battery Voltage V||48 V|
Syrio Power Inverter SI5000 Pure Sine Wave
5000VA 4000W 48V with 50A PWM charge controller integrated
The inverter SI5000 is an inverter / ups-wave pure and high frequency, suitable for the realization of photovoltaic systems Off-grid. Through this product, you can realize your dream of performing energetically autonomous or nearly so, while lowering the cost of your bills and having the ability to integrate, with ease, the PV system with your electrical system.
Inverters, UPS can operate in both modes, giving priority to the electricity grid and in case of black-out batteries and is in inverter mode, giving priority to the battery. The mode of operation, can be easily changed from the LCD menu that provides system information. Inverters are equipped with an RJ45 COM port which can be used to connect to the RS232 serial port of a PC through which you can perform system monitoring and programming of the inverter.
The inverter series SI have an integrated charge controller PWM 50A.
|2 years above the product|
Using the machine in UPS mode (priority mains), if black-out we will charge the batteries and power from the photovoltaic system. The exchange between mains and battery is automatic, in fact, upon the occurrence of certain events such as black-out, the machine switches from the network to which, together with photovoltaic energy stored in the batteries, ensure the continuity of supply of the loads. Spreader is program the limits of the input voltages, so as to safeguard the loads sensitive to voltage fluctuations resulting from the network.
The SI5000, in the operation by an inverter, can be programmed in two modes:
The inverter supplies the load draws power directly from the photovoltaic system. In the case in which the energy produced by the PV was not sufficient to powered loads in use, it automatically, fetch the energy previously accumulated batteries. The withdrawal from the mains (ie the purchase of electric energy by our manager) will only happen in the event of failure by the photovoltaic system (eg .: night, cloudy weather, etc..) Or if the batteries are depleted, reaching voltages are too low.
The inverter powers the loads by taking energy from the photovoltaic system and, in the case where the energy is not sufficient, the inverter will pick up energy from the batteries also. The withdrawal of energy from the network will take place only in in which the voltage of the battery is too low.
All inverters SYRIO POWER can be connected together in parallel through a communication card and sync data, in either single-phase and three-phase mode in both.
You can connect a maximum of 4 inverters in parallel for a total of maximum flow output of 16 Kw 20Kva.
You can connect a maximum of 3 inverters (one per phase) for a total of maximum flow output of 12 Kw 15KVA
SOLAR CHARGER (OPTION)
30 other products in the same category: